VIEW PDF (40.15 KB)
The Energy Resources Conservation Board (ERCB) is requesting input on the draft directive Water Disposal Limits and Measurement and Reporting Requirements for Thermal In Situ Oil Sands Schemes. This draft directive contains
In February 2009, the ERCB and Alberta Environment (now known as Environment and Sustainable Resource Development [ESRD]) requested input on the joint draft directive Requirements for Water Measurement, Reporting and Use for Thermal In Situ Oil Sands Schemes. Since then, the ERCB and ESRD have decided to proceed separately in the development of regulatory requirements regarding water use at in situ oil sands schemes. The ERCB has, therefore, amended the draft directive to build upon existing ERCB regulatory requirements to maximize produced water recycle and minimize disposal at thermal in situ oil sands schemes. The maximum disposal limit set out in the draft directive is intended to accomplish this.
The new directive will replace
Feedback on the draft directive, which is available on the ERCB website www.ercb.ca, will be accepted until September 14, 2012. Send all feedback or questions by e-mail to Tom Keelan and Kudjo Fiakpui at firstname.lastname@example.org. All feedback received will be reviewed for the purposes noted in the bulletin and will be posted on the ERCB website. All of the comments provided through this consultation will form part of the public record and, at the discretion of the ERCB, any comment received may also be attributed to the specific individual(s) providing it. Personal information provided with comments will be collected, used, and disclosed in accordance with the Freedom of Information and Protection of Privacy Act. The ERCB may use the personal contact information you provide for follow-up communication related to your feedback.
For more information on the draft directive, see the frequently asked questions on the directive’s web page. The ERCB may post additional frequently asked questions throughout this consultative process.
<original signed by>
Terry Abel, P.Eng.
Oil Sands and Coal Branch